Video format สำหรับ BrightSign

The following describes the requirements for video to play successfully on BrightSign players.

XTx44, XDx34, HDx24

4K Video

  • Video Codec: H.264, H.265, or VP9

  • Resolution: The maximum supported resolution is 4096x2160x60p.

  • Color Depth: 4K video can be encoded at 4:2:0 subsampling with 8 bits (Main Profile) or 10 bits (Main 10 Profile) of depth.

  • HDR and Dolby Vision: XTx44 players support both HDR10 and Dolby Vision.

  • Display Hardware: The maximum supported framerate and color depth are also affected by your display hardware. See this section of the 4K Video Encoding tech note for more details. 

NoteBrightSign players support both H.265 version 1 profiles: Main and Main 10. However, we do not support the recently ratified version 2 profiles.

  • Container Format: The following container formats are supported: .ts, .mov.mp4, .mkv, .webm.

Note: XTx44/XDx34 models currently support .webm video with the Opus audio codec (not Vorbis), while HDx24 models support .webm with the Vorbis audio codec (not Opus).

  • Bitrate: The XTx44 and XDx34 models support a constant bit rate (CBR) between 70 and 80 Mbps. These values apply to both the primary and secondary video decoders.

  • Merge Mode: If you are using B-frames as references in H.265 “merge mode”, the size of the references list should be limited to two or less.

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

Note4K video must be played from a Class 10 SD card.

HD Video

  • Supported Codecs: H.265, H.264, VP9, MPEG-2

  • Resolution: The maximum supported resolution is 1920x1080. Note that some supported VESA video modes have limitations, as outlined in this FAQ

  • Supported Extensions/Containers.ts.mpg.vob.mov.mp4.m2ts

Note: .mov files with compressed "atoms" (i.e. metadata) are not currently supported. 

  • Additionally Supported Extensions: Players also support .webm video with Vorbis audio (the Opus audio codec is not supported).

  • Specs for H.265 Extensions/Containers: Support for Main and Main 10 profiles up to level 5.1

  • Specs for H.264 Extensions/Containers: Support for Main and High profiles up to level 4.2

  • Maximum Recommended Video Bit Rate: 25Mbps

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

XTx43, XDx33, 4Kx42

4K Video

  • Video Codec: 4K video must be encoded as an H.265 (HEVC) file. 

  • Resolution: The maximum supported resolution is 3840x2160x60p.

  • Color Depth: 4K video can be encoded at 4:2:0 subsampling with 8 bits (Main Profile) or 10 bits (Main 10 Profile) of depth.

  • HDR and Dolby Vision: XTx43 players support HDR10

  • Display Hardware: The maximum supported framerate and color depth are also affected by your display hardware. See this section of the 4K Video Encoding tech note for more details. 

NoteBrightSign players support both H.265 version 1 profiles: Main and Main 10. However, we do not support the recently ratified version 2 profiles.

  • Container Format: The following container formats are supported: .ts, .mov.mp4, .mkv, .webm.

Note: These players support .webm video with Vorbis audio only. The Opus audio codec is not supported.

  • Bitrate: We recommend a CBR between 30 and 40 Mbps. These values apply to both the primary and secondary video decoders.

  • Merge Mode: If you are using B-frames as references in H.265 “merge mode”, the size of the references list should be limited to two or less.

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

Note4K video must be played from a Class 10 SD card.

HD and SD video

  • Supported Codecs: H.265, H.264, VP8, MPEG-2, MPEG-1

  • Resolution: The maximum supported resolution is 1920x1080. Note that some supported VESA video modes have limitations, as outlined in this FAQ

  • Supported Extensions/Containers.ts.mpg.vob.mov.mp4.m2ts

Note: .mov files with compressed "atoms" (i.e. metadata) are not currently supported. 

  • Additionally Supported Extensions: BrightSign players support .wmv files that are exported from PowerPoint (i.e. video-only .wmv without .wma audio). Players also support .webm video with Vorbis audio (the Opus audio codec is not supported).

  • Specs for H.265 Extensions/Containers: Support for Main and Main 10 profiles up to level 5.1

  • Specs for H.264 Extensions/Containers: Support for Main and High profiles up to level 4.2

  • Specs for MPEG-1 Extensions/Containers: System streams only (elementary streams are not supported)

  • Maximum Recommended Video Bit Rate: 25Mbps

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

LS424

  • Supported Codecs: H.265, H.264, MPEG-2

  • Resolution: The maximum supported resolution is 1920x1080. Note that some supported VESA video modes have limitations, as outlined in this FAQ

  • Supported Extensions/Containers.ts.mpg.vob.mov.mp4.m2ts

Note: .mov files with compressed "atoms" (i.e. metadata) are not currently supported. 

  • Additionally Supported Extensions: Players also support .webm video with Vorbis audio (the Opus audio codec is not supported).

  • Specs for H.265 Extensions/Containers: Support for Main and Main 10 profiles up to level 5.1

  • Specs for H.264 Extensions/Containers: Support for Main and High profiles up to level 4.2

  • Maximum Recommended Video Bit Rate: 25Mbps

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

HDx23, LS423

  • Supported Codecs: H.265, H.264, VP8, MPEG-2, MPEG-1

  • Resolution: The maximum supported resolution is 1920x1080. Note that some supported VESA video modes have limitations, as outlined in this FAQ

  • Supported Extensions/Containers.ts.mpg.vob.mov.mp4.m2ts

Note: .mov files with compressed "atoms" (i.e. metadata) are not currently supported. 

  • Additionally Supported Extensions: BrightSign players support .wmv files that are exported from PowerPoint (i.e. video-only .wmv without .wma audio). Players also support .webm video with Vorbis audio (the Opus audio codec is not supported).

  • Specs for H.265 Extensions/Containers: Support for Main and Main 10 profiles up to level 5.1

  • Specs for H.264 Extensions/Containers: Support for Main and High profiles up to level 4.2

  • Specs for MPEG-1 Extensions/Containers: System streams only (elementary streams are not supported)

  • Maximum Recommended Video Bit Rate: 25Mbps

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall, as well as videos of large filesize and/or duration

XDx32, XDx30, HDx22, HDx20, LSx22, HDx10

  • Supported Codecs: H.264, MPEG-2, MPEG-1

  • Resolution: The maximum supported resolution is 1920x1080. Note that some supported VESA video modes have limitations, as outlined in this FAQ

  • Supported Extensions/Containers.ts.mpg.vob.mov.mp4.m2ts

Note: .mov files with compressed "atoms" (i.e. metadata) are not currently supported.

  • Additionally Supported Extensions.wmv files that are exported from PowerPoint (i.e. video-only .wmv without .wma audio).

  • Specs for H.264 Extensions/Containers: Support for Main and High Profiles up to level 4.2

  • Specs for MPEG-1 Extensions/Containers: System streams only (elementary streams are not supported)

  • Maximum Recommended Video Bit Rate: 25Mbps

  • Audio Support: AAC audio (CBR/VBR) up to 288Kbps

  • Fast Start: Enabling fast start (-movflags +faststart) is recommended, especially for videos used in synchronized playback and BrightWall (not applicable to HDx10 models), as well as videos of large filesize and/or duration

Bitrates

Guidelines by Player Model

Product

Maximum Bitrates for 4K, HD, and other video*

Product

Maximum Bitrates for 4K, HD, and other video*

XTx44

95Mbps 

XDx34

95Mbps 

HDx24

50Mbps 

XTx43

50Mbps 

XDx33

50Mbps 

4Kx42

50Mbps 

LS424

50Mbps 

HDx23

50Mbps 

LS423

50Mbps 

*Values are for regular file playback and can be seen as playback in ideal conditions. See Performance Limiters, below, for more information